Potential Equipment Transformers - SPECIALTY TRANSFORMERS WEBSITE

+1 801.433.4100
Go to content

Main menu:


Potential Equipment Transformers (PET’s) are used as control or distribution transformers in areas of low load density.  
They are an excellent and economical alternative to 5 and 10 kVA units when only .5 to 3 kVA is power is needed.

  • .5, 1, 2 or 3 kVA

  • Primary voltages of 120 to 34500GRDY/19900

  • Secondary voltages of 120, 240, 240/120

  • Single rated primary voltages

  • Pole Hung  

  • One or Two hanger brackets

  • Lifting lugs

  • Copper windings

  • Optional wildlife protectors

  • Core loss lower than 5 or 10 kVA substitute

  • 95 & 125 kV BIL ratings

  • Pressure relief valve

  • Built to C57.12.90 ANSI standards

  • Paint meets or exceeds ANSI or IEEE finishing guidelines for pole type units  

  • Dual rated primaries (7200/7620, 7620/7980, 12000/16340 or 13200/13800)

  • One or two high voltage porcelain bushings

  • One, two or three low voltage bushings, or bendix connector

  • High voltage handwheels

  • Internal Primary Fuse available


 
 
 
Back to content | Back to main menu